EasyWeed® Electric Heat Transfer Sheets

(No reviews yet) Write a Review
SKU:
SISR-0000-EWEL-0000
Type:
Heat Transfer (Iron-On)
Finish:
Semi-Gloss
$3.75

Siser EasyWeed® Electric Heat Transfer Sheets

Siser EasyWeed® Electric Heat Transfer Vinyl (also known as T-shirt vinyl or Iron-on vinyl) will add a whole new dimension to your designs! With a vibrant, metallic sheen, this heat transfer vinyl comes with a heat activated adhesive on one side, and a clear carrier sheet that protects the fabric and acts like transfer tape during application on the other side. Not only can EasyWeed® Electric be layered, but its brilliant finish is durable wash after wash!

We offer Siser EasyWeed® Electric heat transfer vinyl in 24 colors and 3 different sizes: 12"x12", 12"x24", and 12"x5ft.

Vinyl Specs:  PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered

Cut Settings: ***Always "flip" your image (cut in reverse)***

Cricut®

    • Blade: Standard
    • Setting: Iron-on

Silhouette Cameo®

    • Blade: 2
    • Speed: 7
    • Thickness: 5

*Cut settings can differ from each machine due to blade sharpness, vinyl type, etc. Test cuts are strongly recommended!*

Application Instructions: 

• Set iron dial between Cotton and Linen (305°F/150°C if using a heat press)
• Cover design with multi-use paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold