StripFlock® Heat Transfer 12"x15" Sheets

(No reviews yet) Write a Review
Heat Transfer (Iron-On)

Siser StripFlock® Heat Transfer Sheets

StripFlock® Heat Transfer Vinyl has a soft, fuzzy finish that not only makes for great choice on kids' clothing, it is also the only flocked vinyl in the industry that can be layered on itself. The ability to layer allows you to take full advantage of the beautiful color selection and create textured, visually appealing garments with ease!

We offer 12"x15" sheets of Siser StripFlock® heat transfer vinyl in 12 different colors.

Vinyl Specs:  PVC Composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade • Can be layered

Cut Settings: ***Always "flip" your image (cut in reverse)***


Blade: Standard

Setting: Iron-On+

Silhouette Cameo®:

Blade: Standard, 5

Setting: Heat Transfer Material (Smooth)
Speed: 5
Thickness: 15

Scan N Cut:

Blade: 4

Cut Speed: 1
Cut Pressure: 2

Roland GS/GX-24:

 Blade: 45°

Gram Force: 80-120
Offset: .250
Speed: 30 cm/s


Blade: 45°

Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s

Application Instructions: 

• Set iron dial between Cotton and Linen (320°F/160°C if using a heat press)
• Cover design with multi-use paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold