Step 1 - EasyWeed Adhesive

(No reviews yet) Write a Review
SKU:
SISR-0000-ADSV-0000
Type:
Heat Transfer (Iron-On)
$2.25

Siser EasyWeed Adhesive - Step 1 Adhesive

Siser EasyWeed Adhesive is compatible with cost effective screen printing foils, this adhesive is a money saver and a money maker!  In addition to screen print foils, EasyWeed Adhesive is compatible with fabrics and other materials that lend themselves to adhesion. The milky colored adhesive shares benefits of EasyWeed such as a pressure sensitive carrier and low application temperature. Therefore, the standard cutting process for cuttable materials is used when working with EasyWeed Adhesive. Weeding on a dark surface will provide the best visibility. EasyWeed Adhesive can be cut with laser systems.

Just like the materials in the EasyWeed Family, EasyWeed Adhesive HTV has a carrier side and a material side. The carrier side is noticeably smoother and shinier than the material side. Now you may notice the material side looks like it doesn’t have any, well, material. That’s because it’s simply a layer of mostly transparent glue. Not just any glue though, EasyWeed Adhesive HTV! 

EasyWeed Adhesive can be cut on any vinyl cutter and requires the typical steps before cutting Siser heat transfer vinyl. Make sure to mirror your design and place the carrier side face down on the cutting mat. Then make sure you pin the image below so you can always find your cut settings! IWe always recommend a test cut before cutting a full design.