Wood Burning Just Got Easy!
Scorch Marker is chemical wood burning marker. Apply your design, heat it up and watch the wood burn. It's simple, easy, and fun!
MORE IS LESS: A little goes a long way. It may not seem like much, but only the smallest amount of liquid is needed.
TIME IS NOT A FACTOR: Go as slow as you like. It doesn’t matter if it’s dry or wet when it’s heated.
WOOD CHOICE: Wood like basswood, poplar, pine, birch and cedar work best. Try to pick wood that is light in weight and color...Scorch Pens also work great on cardboard and craft paper!
- Prep: We recommend sanding to at least 220 grit. The smoother the surface the cleaner the lines.
- Draw: Shake your Scorch Marker and prime it by pressing the tip on a paper towel until it becomes saturated with liquid. Then draw your design, refilling the nib as needed.
- Heat: Once you've applied your design, heat it up and watch it burn! The more heat you apply, the darker the design. We recommend using a heat gun but other heat sources can work too! Just make sure it gets to at least 375 F.
Get Creative! Use adhesive vinyl (like Oracal 631) as a stencil!
