Holographic Rainbow Pearl Heat Transfer Sheets

(No reviews yet) Write a Review
Heat Transfer (Iron-On)

Siser Rainbow Pearl Holographic Heat Transfer Sheets

Rainbow Pearl has a more smooth, mirror-like finish that shines brilliant blues and purples, depending on the angle from where it is viewed. When applied onto dark garments, Rainbow Pearl takes on a deep gold finish with hints of blue-green when viewed from the side.

We offer Siser Holographic heat transfer vinyl in 2 different sizes: 9"x12" and 12"x19".

Vinyl Specs:  Polyester Composition • Pressure sensitive backing • Gloss finish • 110 Microns/4.3 Mils • 45°/60° blade • DO NOT Layer

Cut Settings: ***Always "flip" your image (cut in reverse)***


Blade: Standard

Setting: Light Cardstock or Fabric

Silhouette Cameo®:

Blade: Standard, 5

Setting: Heat Transfer Material (Smooth)
Speed: 5
Thickness: 20

Scan N Cut:

Blade: 2

Cut Speed: 1
Cut Pressure: 3

Roland GS/GX-24:

 Blade: 45°

Gram Force: 180-190
Offset: .250
Speed: 30 cm/s


Blade: 45°

Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s

Application Instructions: 

• Set iron dial between Cotton and Linen (320°F/160°C if using a heat press)
• Cover design with multi-use paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold