EasyReflective™ Heat Transfer Sheets
Siser's EasyReflective™ HTV is a highly reflective heat transfer material, and unlike other reflective heat transfer vinyls, comes with a pressure sensitive carrier sheet (just like EasyWeed®). EasyReflective™ can be applied to a wide array of fabrics due to its low application temperature. It is perfect for athletic wear or uniforms.
We offer Siser EasyReflective™ heat transfer vinyl in both 9"x12" and 12"x20" sheets.
Vinyl Specs: PET Composition • Pressure sensitive backing • Reflective finish • 140 Microns/5.5 Mils • 45°/60° blade • Layering not recommended
Cut Settings: ***Always "flip" your image (cut in reverse)***
Cricut®:
Blade: Standard Setting: Iron-on |
Silhouette Cameo®:
Blade: Standard, 3 Setting: Heat Transfer Material (Smooth) |
Scan N Cut:
Blade: 2 Cut Speed: 1 |
Roland GS/GX-24:
Blade: 45° Gram Force: 80g-90g |
Application Instructions:
• Set iron dial between Cotton and Linen (305°F/150°C if using a heat press), and preheat garment for 2-3 seconds
• Cover design with multi-use paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15-20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier warm (at least 15 seconds off heat)